Albatron Technology Computer Monitor EM215 User Manual

External Multi-Touch Module

EM215

Hardware Installation：

（a）To install the clips stably, please screw up the clips by the bundled screws.

（b）To loosen the clip by adjusting the screw, then put EM215 on monitor. Your

monitor will look like the picture below.

（c）Connect EM215 and PC by bundled USB cable (type A connector to PC, type B

connector to EM215).

Driver Installation - Windows 7：

EM215 will be recognized automatically under Windows 7, there is no need to install

drvier.

Driver Installation – Windows XP/ Vista:

You should install drvier for enabling single touch under Windows XP / VISTA.

Step 1:After double clicking the driver pack, you’ll see the window as below. To click

“Next” to continue.

Step 2: Select components to install

Step 3: Choose the folder to install drvier

Step 4: Installing

Step 5: Finish installation

Download Windows XP/ Vista driver via the link below:

http://www.albatron.com.tw/taiwan/service/download/download_index.asp

Accessories：

（a）EM215 External Multi-Touch Module：

（b）USB Cable (Type A to Type B)：

（c）Clips x 2：

（d）Screws x 4