HV-DH1EH
DVD PLAYER/STEREO VIDEO
CASSETTE RECORDER
OPERATING INSTRUCTIONS
BEDIENUNGSANLEITUNG
ISTRUZIONI PER LUSO
MANUAL DEL USUARIO
GEBRUIKSAANWIJZINGEN
ENGLISH
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
R
8C-JF1-904-11
020502AMK-U-L
PAL
Contents
Operation with Audio CD and MP3 Discs. . . . . . . 27
Playing an Audio CD and MP3 Discs . . . . . . . . . . . . 27
ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
ꢀ Moving to another Track. . . . . . . . . . . . . . . . 27
ꢀ Repeat Track/All/Off . . . . . . . . . . . . . . . . . . . 27
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 27
ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 27
ꢀ Changing the Audio Channel . . . . . . . . . . . . 27
Programmed Playback . . . . . . . . . . . . . . . . . . . . . 28
Programmed Playback with Audio CD
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important notes on controlling this unit . . . . . . 2
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Front Panel and Display Window . . . . . . . . . . . . . . 6
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
and MP3 Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Programmed Playback with Video CD . . . . . . . . . . . 28
ꢀ Repeat Programmed Tracks. . . . . . . . . . . . . 28
ꢀ Erasing a Track from Program list. . . . . . . . . 28
ꢀ Erasing the Complete Program list. . . . . . . . 28
Additional Operation - VCR part . . . . . . . . . . . 29-30
On Screen Display. . . . . . . . . . . . . . . . . . . . . . . 29
Tape Counter Memory Stop . . . . . . . . . . . . . . . . 29
Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Hi-Fi Stereo Sound System . . . . . . . . . . . . . . . . 30
Wide Screen Compatibility 16:9 . . . . . . . . . . . . . 30
To set the decoder . . . . . . . . . . . . . . . . . . . . . . 30
Additional Operation - DVD part . . . . . . . . . . . . . . 31
Video Mode Setting . . . . . . . . . . . . . . . . . . . . . . 31
Notes on MP3 Discs . . . . . . . . . . . . . . . . . . . . . 31
Special Recording . . . . . . . . . . . . . . . . . . . . . . . . . 32
Copying from DVD to VCR . . . . . . . . . . . . . . . . . 32
Recording from another video recorder . . . . . . . 32
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting to Optional Equipment . . . . . . . . . . . 10
Before Operation - VCR part . . . . . . . . . . . . . . 11-15
Tuning in a video channel on your TV. . . . . . . . . 11
Initial preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting the clock Manually . . . . . . . . . . . . . . . . . 12
To set the colour system . . . . . . . . . . . . . . . . . . 12
How to use the main menu. . . . . . . . . . . . . . . . . 13
Tuning in TV stations Automatically . . . . . . . . . . 13
Tuning in TV stations Manually . . . . . . . . . . . . . . 14
Changing the order of TV stations . . . . . . . . . . . 15
Deleting TV stations. . . . . . . . . . . . . . . . . . . . . . 15
Before Operation - DVD part . . . . . . . . . . . . . . 16-19
General Explanation. . . . . . . . . . . . . . . . . . . . . . 16
On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 16
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 17-19
ꢀ Initial Settings General Operation. . . . . . . . . 17
ꢀ Language . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ꢀ Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ꢀ Others (DRC/Vocal/PBC) . . . . . . . . . . . . . . . 18
ꢀ Parental Control. . . . . . . . . . . . . . . . . . . . . . 19
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 34
Country Code list . . . . . . . . . . . . . . . . . . . . . . . . . 35
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Operation
About the symbols for instructions
Operation with Tape . . . . . . . . . . . . . . . . . . . . . 20-23
Playing a tape . . . . . . . . . . . . . . . . . . . . . . . . . . 20
ꢀ AD (Advertisement) Skip. . . . . . . . . . . . . . . . . 20
ꢀ OPR (Optimum Picture Response) . . . . . . . . . 20
One-Touch Timer Recording (OTR) . . . . . . . . . . 21
ShowView programming. . . . . . . . . . . . . . . . . . . 22
Timer recording using On Screen Display. . . . . . 23
Operation with DVD and Video CD . . . . . . . . . . 24-26
Playing a DVD and Video CD . . . . . . . . . . . . . . . 24
General Features . . . . . . . . . . . . . . . . . . . . . . . . 24
ꢀ Moving to another TITLE . . . . . . . . . . . . . . . 24
ꢀ Moving to another CHAPTER/TRACK . . . . . 24
ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 24
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
ꢀ
Still Picture and Frame-by-Frame Playback. . . . . 25
ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ꢀ Random . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ꢀ Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 25
ꢀ Time Search . . . . . . . . . . . . . . . . . . . . . . . . 25
ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 25
ꢀ Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
ꢀ Marker Search. . . . . . . . . . . . . . . . . . . . . . . 26
Special DVD Features . . . . . . . . . . . . . . . . . . . . 26
ꢀ Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 26
ꢀ Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 26
ꢀ Camera Angle . . . . . . . . . . . . . . . . . . . . . . . 26
ꢀ Changing the Audio Language. . . . . . . . . . . 26
ꢀ Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3
Before Use
Disc-related terms
Title (DVD only)
Playable Discs
The main film content or accompanying feature content
or additional feature content, or music album. Each title
is assigned a title reference number enabling you to
locate it easily.
DVD
(8 cm / 12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles.
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a CD-R or CD-RW that
contains audio titles or MP3 files.
A title is composed of one or several chapters. Each
chapter is assigned a chapter number, enable you to
locate the chapter you want. Depending on the disc, no
chapters may be recorded.
Notes
– Depending on the conditions of the recording equip-
ment or the CD-R/RW disc itself, some CD-R/RW
discs cannot be played on the unit.
– The unit cannot play the CD-R/RW discs that contain
no data, or contain different kinds of formatted data
other than MP3 and CD-DA data.
– Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
– Do not use irregular shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Track (Video CD and audio CD only)
Sections of a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Scene
On a video CD with PBC (Playback control) functions,
moving pictures and still pictures are divided into sec-
tions called “Scenes”. Each scene is displayed in the
menu screen and assigned a scene number, enabling
you to locate the scene you want.
A scene is composed of one or several tracks.
Notes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs may
be intentionally fixed by software manufacturers. As this
unit plays DVDs and Video CDs according to disc con-
tent designed by the software manufacturer, some play-
back features of the unit may not be available, or other
functions may be added.
Refer also to the instructions applied with the DVDs and
Video CDs. Some DVDs made for business purposes
may not be played on the unit.
Types of video CDs
There are two types of video CDs:
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures
of high resolution can be played if they are included in
the disc.
Regional code of the DVD player and DVDs
This DVD player is designed and manufactured
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
2
for playback of region “2” encoded DVD software.
The region code on the labels of some DVD discs indi-
cates which type of player can play those discs. This unit
can play only DVD discs labeled “2” or “ALL”. If you try to
play any other discs, the message “Check Regional
Code” will appear on the TV screen. Some DVD discs
may not have a region code label even though their
playback is prohibited by area limits.
Note on DTS-encoded CDs
Do not play back DTS-encoded CDs when connecting
to an AV receiver not equipped with a DTS decoder.
-
4
Before Use (Cont’d)
Precautions
Storing discs
After playing, store the disc in its case.
Handling the unit
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
light, as there may be a considerable temperature
increase inside the car.
When shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
Cleaning discs
When setting the unit
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the cen-
ter out.
The picture and sound of a nearby TV or radio may be
distorted during playback. In this case, position the unit
away from the TV or radio, or turn off the unit after
removing the disc.
To keep the surface clean
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber of plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
Cleaning the unit
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents, such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
About Symbols
About the
symbol display
To obtain a clear picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
“
” may appear on the TV screen during operation.
This icon means the function explained in this owner’s
manual is not available on that specific DVD video disc.
About the disc symbols for instructions
A section whose title has one of the following symbol is
applicable only to the disc represented by the symbol.
For details, please contact your nearest dealer.
DVD
DVD
Notes on Discs
VCD2.0
Video CDs with the PBC (playback control)
function.
Handling discs
VCD1.1
Video CDs without the PBC (playback control)
function.
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
CD
Audio CDs.
Do not stick paper or tape on the disc.
MP3 MP3 disc.
5
Front Panel and Display Window
Tape Eject
PAUSE (
)
Pause playback temporarily / press repeatedly
for frame-by-frame playback.
POWER 6STANDBY/ON
Switches the unit to
ON or OFF.
STOP ( Á )
Stops playback.
PLAY ( G)
Starts playback.
Forward Skip/Scan, Fast-Forward (
)
Go to next chapter/track.
Press and hold for two seconds for a fast forward search.
Winds the tape forwards.
Reverse Skip/Scan, Rewind (
)
OPEN/CLOSE (
Opens or closes the disc tray.
)
Go to beginning of current
chapter/track or to previous chap-
ter/track. Press and hold for two
seconds for a fast reverse search.
Rewinds the tape.
Disc Tray
Insert a disc here.
Tape Compartment
POWER
EJECT
OPEN/CLOSE
STANDBY/ON
AV3 IN
L–AUDIO –R
REC/OTR
PLAY
STOP
PAUSE
VIDEO
DVD/VCR
CHANNEL
DVD
VCR
DVD/VCR
Indicator
Display window
Shows the current
status of the unit.
VCR Record
Channel Programme Selectors
Remote Sensor
Video Jack
Audio (L/R) Jacks
DVD/VCR
Selector
Point the remote control here.
TITLE Indicates current title number
PROG. Programmed playback active
CHP/TRK Indicates current chapter or track number
VCR’s internal tuner is engaged
A timer recording is programmed or in progress
Channel programme
MP3 MP3 disc inserted
ANGLE active
VCR recording is engaged
Indicates total playing time/elapsed time
Child Lock is engaged
Bilingual mode
Indicates repeat mode
CD Audio CD inserted
The Hi-Fi track of a VHS
tape is playing
DVD
DVD inserted
VCD Video CD inserted
Cassette-In indicator
The current TV
show or video is
broadcast in stereo
Displays the
recording and
playback speed
REC
HI-FI
A
B
PROG. TITLE CHP/TRK VCR TIMER
CDREC
ALL MP3
BIL PR
VCD
DVD
ST
SP
LP
EP
6
Remote Control
DVD/VCR select button
Selects operational mode of remote
control.
POWER
Switch this unit ON or OFF.
TV/VCR
Switch between your TV’s tuner and
the VCR’s internal tuner.
OPEN/CLOSE
EJECT (Z)
- Open or close the the disc tray.
- Tape Eject.
OUTPUT SELECT
Select one of your output sources
to view on the TV screen.
DISC MENU
Access menu of a DVD disc.
OK/ENTER
DISPLAY
CLK/CNT
Access the On-Screen Display.
Shows you the current time or counter.
F/G/D/E (left/right/up/down)
- Select an item in the menu
CH/TRACKING (v/V): Select channel
Acknowledge menu selection.
AV
Select input source for recording
into tape.
REC/OTR
Record your input sources into tape.
-
•
programme of VCR.
i/SETUP
Access or remove setup menu.
- Search forward* / go to next
chapter or track.
- Winds the tape forwards.
* Press and hold button for about
TOP MENU •
Display the title menu of the disc if
available.
PAUSE/STEP ( ) •
Pause playback temporarily / press
repeatedly for frame-by-frame
playback.
STOP ( Á ) •
Stops playback.
0-9 numerical buttons
Select numbered items in a menu.
two seconds.
• PLAY
Starts playback.
•
- Search backward* / go to beginning
of current chapter or track or go
to previous chapter or track.
- Rewinds the tape.
* Press and hold button for about
two seconds.
PROGRAM
Access or remove program menu.
AUDIO •
Select an audio language (DVD) or
an audio channel (CD).
CLEAR
- Clear a track number on the
program menu or a mark on the
MARKER SEARCH menu.
- Reset tape counter to zero.
SUBTITLE •
Select a subtitle language.
MARK •
Mark any point during playback.
• REPEAT
- Repeat chapter, track, title, all.
• A-B/SPEED
SEARCH •
Display MARKER SEARCH menu.
ANGLE •
Select DVD camera angle if available
RETURN •
- Remove the setup menu.
- Displays the menu of a video CD
with PBC.
C.LOCK
Switch the Child Lock on and off.
- Repeat sequence.
- Select the recording speed of the
tape.
• RANDOM/AD-SKIP
- Play tracks in random order.
- CM SKIP
• ZOOM
Enlarge video image.
• SHOWVIEW
To display the programme menu for
ShowView programming.
Remote Control Operation Range
Remote control battery installation
Point the remote control at the remote sensor and press
the buttons.
Detach the battery cover on the rear of
the remote control, and insert two R03
ꢀ Distance: About 7 m from the front of the remote
sensor
ꢀ Angle: About 30° in each direction of the front of the
remote sensor
(size AAA) batteries with
aligned correctly.
and
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
Rear Panel
AUDIO OUT (Left/Right)
Connect to an amplifier, receiver or stereo system.
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
AERIAL
Connect the aerial using this jack.
EURO AV2 DECODER
Connect to pay-TV decoder or another video recorder.
DVD EXCLUSIVE OUT
VCR IN+OUT/DVD OUT
AUDIO
OUT
DIGITAL
AUDIO OUT
AERIAL
EURO AV2
DECODER
R
L
COAXIAL
EURO AV1
AUDIO/
RF.OUT
VIDEO
DVD/VCR
OUT
VIDEO OUT
AC Power Cord
Connect to a power
source.
EURO AV1 AUDIO/VIDEO (VCR IN+OUT/DVD OUT)
Connect to your TV set or another video recorder.
RF.OUT
Connect to your TV using this jack.
VIDEO OUT
Connect to a TV with video inputs.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
Connections
DVD exclusive out connection
ꢀ You can only watch the DVD playback.
Tips
ꢀ Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the unit.
ꢀ Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
Connect the VIDEO OUT jack on this unit’s DVD
1
EXCLUSIVE OUT to the video in jack on the TV
using the video cable.
Connect the Left and Right AUDIO OUT jacks of
ꢀ For better sound reproduction, connect this unit’s
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See “Connecting to optional equipment” on page 10.
2
this unit’s DVD EXCLUSIVE OUT to the audio left/
right in jacks on the TV using the audio cables.
Rear of this unit (DVD exclusive out connection)
Caution
VCR IN+OUT/DVD OUT
DVD EXCLUSIVE OUT
– Make sure this unit is connected directly to the TV. Set
the TV to the correct video input channel.
– Do not connect this unit’s AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
AUDIO
OUT
DIGITAL
AUDIO OUT
AERIAL
EURO AV2
DECODER
R
L
COAXIAL
RF.OUT
EURO AV1
AUDIO/
VIDEO
DVD/VCR
OUT
VIDEO OUT
Connecting to a TV
ꢀ Make one of the following connections, depending on
the capabilities of your existing equipment.
Basic connection (AV)
Connect the EURO AV1 AUDIO/VIDEO on the rear
panel of this unit to the SCART input socket on the
TV using a SCART lead.
1
Rear of TV
VIDEO
INPUT
AERIAL
SCART INPUT
AUDIO INPUT
Some TV broadcasters transmit encoded television
2
signals which you can only see with a purchased or
rented decoder. You can caonnet such a decoder
(descrambler) to this unit.
L
R
Satellite
Basic connection (RF)
Connect the RF antenna cable from your indoor/
1
outdoor antenna to AERIAL jack on the rear panel
of this unit.
Connect the supplied RF antenna cable from the
2
RF.OUT jack on the rear panel of this unit to your
television’s Antenna Input.
DVD EXCLUSIVE OUT
AUDIO
OUT
DIGITAL
AUDIO OUT
AERIAL
EURO AV2
DECODER
R
L
COAXIAL
RF.OUT
EURO AV1
AUDIO/
VIDEO
DVD/VCR
OUT
VIDEO OUT
Rear of this unit (Basic connection)
9
Connections (Cont’d)
Connecting to Optional Equipment
Notes
–
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Surround
– To see the audio format of the current DVD in the On-
Screen Display, press AUDIO.
Connect the Left and Right AUDIO OUT jacks on this
unit to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
Accessory Audio/Video (A/V) Connections to
this unit
Connect the AV 3 IN jacks on the unit to the audio/video
out jacks on your accessory component, using the
optional audio/video cables.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2 or DTS)
Connect this unit’s DIGITAL AUDIO OUT jack
1
(COAXIAL) to the corresponding in jack on your
amplifier. Use an optional coaxial audio cable.
You will need to activate this unit’s digital output.
2
(See “Digital Audio Output” on page 18).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
POWER
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
STANDBY/ON
AV3 IN
L–AUDIO –R
VIDEO
DVD
VCR
Rear of this unit
VCR IN+OUT/DVD OUT
DVD EXCLUSIVE OUT
AUDIO
OUT
DIGITAL
AUDIO OUT
AERIAL
EURO AV2
DECODER
R
L
COAXIAL
RF.OUT
Pb
EURO AV1
AUDIO/
VIDEO
DVD/VCR
OUT
VIDEO OUT
2 channel analog stereo or Dolby Surround connection.
DVD exclusive out
Digital multi-channel
connection
R
L
COAXIAL
DIGITAL INPUT
AUDIO INPUT
Amplifier (Receiver)
10
Before Operation - VCR part
Press CHANNEL N or M to select another video
channel.You may select any channel number
between 22 and 68.
You can also set it to “OFF” if there is any
interference when your TV is connected to the
VCR with a SCART lead.
Tuning in a video channel on your TV
7
Notes
ꢀ The output frequency of this video recorder
(VCR) is set at UHF channel 36. If channel 36
is already used by another TV station, or if the
picture is distorted, you can change the
transmitter channel of your VCR. Stages 5 ~ 8
will show you how to change the output
frequency of your VCR.
Select a TV channel number on which you wish to
watch video’s.
Press POWER 6STANDBY/ON on the front of your
VCR when you have finished.
Tune this channel so that a bright blue screen
appears.
Store this channel on your TV.
8
ꢀ Your TV receives signals from the video
recorder (VCR) like another TV station. You
have to select a channel number on your TV
and tune it in so that you may watch video
tapes. If you have used a SCART or AUDIO
and VIDEO cables then your TV should already
have a dedicated video channel built into it,
usually called AV.
Notes
Make sure that you have correctly installed your
VCR and successfully tuned in a dedicated video
channel on your TV. If you do not tune in a
dedicated video channel on your TV you will be
unable to view and record video tapes!
Make sure that you have correctly installed your
1
VCR as described earlier in this book.
Press POWER to turn on your VCR.
Turn on your TV.
Initial preset
For the following steps we do assume that you have just
connected your video recorder for the very first time. In
this case the video recorder is on after mains connection.
You should not touch any buttons yet. On the connected
TV you will now see.
Insert a pre-recorded video tape into your VCR
2
and press PLAY on the remote control.
Select a TV channel number on which you wish to
watch video’s.
Don’t worry if you don’t have a video-tape to play at
this stage! If you switch your VCR on and continue
stages 3 ~ 4, instead of seeing video playback tune
your TV until you see a bright blue screen.
Note - If this menu does not appear, your video recorder
was programmed already.
Select the country according to your area with
F and G.
Tune this channel until the video picture is sharp
1
3
and the sound is clear.
If you have used a SCART or AUDIO and VIDEO
cables you will not have to tune your TV, simply
select the AV channel. The AV channel is already
pre-tuned for optimum video playback on your TV.
“A”: Austria, “B”: Belgium, “CH”: Switzerland, “D”:
Germany, “DK”: Denmark, “E”: Spain, “F”: France,
“I”: Italy, “N”: Norway, “NL”: Netherlands, “P”:
Portugal, “S”: Sweden, “SF”: Finland, “AUTRES”:
Others
Store this channel on your TV.
4
You will need to look at the TV instruction book if
you do not know how to do this.
Only carry out stages 5 ~ 8 if you cannot obtain
5
clear video playback as described in stages 1 ~ 4.
A
N
B
NL
CH
P
D
S
DK
E
F
I
Select a TV channel number on which you wish to
watch video’s.
SF ANDERE
Pr-12
OK
i
ACMS
Make sure that your VCR is in standby pressing
POWER on the remote control (only the clock will
be displayed).
Press OK/ENTER to start the automatic storing of
2
the channels of the TV stations in your area.
Press CHANNEL N or M on the front of your
6
VCR for more than 4 seconds.
RF36 will appear in the display window.
The following picture will be displayed on the TV
screen.
01
C02
00 ARD
S
E
Pr-12
ACMS
i
RF CHANNEL 36
P
SET
i
R
11
Before Operation - VCR part
Setting the clock Manually
To set the colour system
The clock in your VCR controls time and date
settings for your VCR.
Press i/SETUP.
The clock is set automatically during ACMS
(Automatic Channel Memory System) when your
VCR detects a channel that broadcasts a Teletext
signal. If the broadcast signal is weak the clock
will not be set and will require setting manually.
1
2 The main menu will appear on the TV screen.
Press or to select the SYSTEM and press
3
4
OK/ENTER.
Press i/SETUP.
Press or to select TIME DATE.
Press OK/ENTER.
Press or to select according to the COLOUR
system used.
1
The auto adjust mode can be set to “OFF” by pressing
or if you want to set the time manually.
Press OK/ENTER.
A B
C
AUTO
SYS-
TEM
REC
OSD
SYS-
TEM
PAL
MESECAM
f
OSD
ON
OFF
4:3
i
OPR
DER
AUTO ADJUST
- -
:
ON
Press i/SETUP to remove the menus from the TV
screen.
1
2
TIME
OK
i
DATE
5
HH MM DD MM YY
- - - - -
:
-
-
.
.
- -
- -
- -
1
2
TIME
i
DATE
Use the numbered buttons on the remote control
to alter the HOURS, MINUTES, DAY, MONTH and
YEAR.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
2
3
The day of the week will appear automatically when
you enter the year.
HH MM DD MM YY
8
:
00
1
.
01
.
02 TUE
1
2
TIME
i
DATE
If you make a mistake press or and enter the
correct details.
4 Press i/SETUP.
12
Before Operation - VCR part
How to use the main menu
Tuning in TV Stations Automatically
This VCR can easily be programmed by using the
menus displayed on screen.
The menus are controlled from the Remote
Control Handset.
If the TV broadcast signal is weak your VCR may
not detect the necessary information and will be
and to store them correctly. To overcome this problem
please turn to the MANUAL TUNING section on
page 14.
Switch on your TV set and video recorder by pressing
1
2
the POWER button.
Press POWER to turn on your VCR.
1
2
Press i/SETUP button.
The main menu will appear on the TV screen.
Press i/SETUP button.
The main menu will appear on the TV screen.
Press or to select the ACMS.
Press OK/ENTER.
1
2
A B
C
Pr-12
P
TIME SYS-
SET
REC
ACMS
-
R
OSD
DATE
TEM
+
REC
OK
f
OSD
ON
OFF
16:9 DECO-
4:3
DER
i
OPR
1
2
A B
C
Pr-12
P
TIME
SYS-
TEM
SET
REC
ACMS
-
OSD
R
DATE
Pr-12
+
f
ACMS
OSD
DECO-
DER
ON
16:9
4:3
ꢀ REC - Timer recording setting (see p. 23).
ꢀ PR SET - Manual tuning setting (see p. 14).
ꢀ ACMS - ACMS (Automatic Channel Memory
System) (see p. 13).
OPR
OFF
OK
i
ꢀ TIME DATE - Date & clock setting (see p. 12).
O
SYSTEM - To set the Colour TV System
(see p. 12).
A
N
B
NL
CH
P
D
S
DK
E
F
I
SF OTHERS
Pr-12
O
ABC OSD - To change the language setting for
OSD.
OK
i
ACMS
You can select the language among
English, Deutsch, Français, Italiano,
Español and Dutch.
Press or to select COUNTRY.
3
4
(A:Austria, B:Belgium, CH:Switzerland,
D:Germany, DK:Denmark, E:Spain, F:France,
I:Italy, N:Norway, NL:Nertherlands, P:Portugal,
S:Sweden, SF:Finland, Others)
Press OK/ENTER again to start the automatic tun-
ing process.
The VCR’s clock will be set automatically when
automatic tuning has finished. If the clock is wrong
please see “Setting the clock manually” on page 12.
O
O
O
O
F.OSD ON/OFF - Turn the on-screen display on
or off (see p. 29).
16:9/4:3 - To select the aspect ratio of your TV
(see p.30).
DECODER - To use a pay-TV decoder (or Satellite)
with your VCR (see p. 30).
OPR - To improve the playback picture
(see p. 20).
01
02
03
C02
C03
C04
00
00
00
ARD
ZDF
WDR 3
Press and to select the desired menu.
Press OK/ENTER and press or to select.
3
4 Press i/SETUP to return to a TV picture.
S
E
Pr-12
i
ACMS
The TV STATION TABLE will appear when tuning is
complete.
Press i/SETUP to save your settings.
01
02
03
04
05
06
07
08
C02
C03
C04
C05
C06
C07
C08
C09
00
00
00
00
00
00
00
00
ARD
ZDF
WDR 3
BR3
HR3
N 3
NDR 3
SWF3
MOVE :
DELETE :
P
SET
,
OK
i
R
13
Before Operation - VCR part
Tuning in TV Stations Manually
In certain areas of the country broadcast signals
may be too weak for your VCR’s automatic tuning
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations
manually in order for your VCR to store them.
Press to select STATION so that you may name
your TV station.
Press OK/ENTER.
5
6
The TV station name list will appear.
ARD
ZDF
WDR 3
BR3
HR3
N 3
PR
09
CH
C10
MFT
00
NDR3
SWF3
Press i/SETUP.
The main menu will appear on the TV screen. Press
or to select the PR SET.
Press OK/ENTER.
P
SET
1
OK
i
R
Press D or E to select a station name from the list.
Press OK/ENTER to select it.
If your station name isn’t on the list do not press
OK/ENTER, but go to stage 7.
1
2
A B
C
Pr-12
P
TIME SYS-
SET
REC
ACMS
R
OSD
DATE
TEM
P
SET
+
-
R
ARD
ZDF
f
OSD
ON
OFF
16:9
4:3
DECO-
DER
OK
i
OPR
WDR 3
BR3
HR3
N 3
PR
09
CH
C10
MFT
00
NDR3
SWF3
PR
01
CH
C 02
MFT
00
STATION
PR-01
P
SET
OK
i
R
CHANNEL/CABLE : AV
You can change a TV station name manually rather
than using the “standard” names.
Press G.
Press or to select letters and numbers for the
new station name.
P
SET
i
R
7
Press i/SETUP.
2
The station table will appear.
Press or to select the programme number that
you want to tune (for example, PR 09).
Press or to move back and forth between char-
acters.
Press OK/ENTER.
01
02
03
04
05
06
07
08
C02
C03
C04
C05
C06
C07
C08
C09
00
00
00
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
PR-07
PR-08
PR
C09
CH
C10
MFT
00
STATION
ZDF
MOVE :
DELETE :
P
SET
,
OK
i
R
P
SET
i
OK
R
Press OK/ENTER.
3 Press AV to select C (Standard stations) or S
Press i/SETUP, confirm the station placement.
Press i/SETUP again.
Your new TV station has now been tuned into your VCR.
If you wish to manually tune other stations repeat
stages 1 - 8.
(Cable stations):
C02 - C69, S01 - S41.
8
Enter the channel number of station that you want
to tune with the numbered buttons or use or
to find the required station.
09
C10
00
ZDF
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
10
11
12
13
14
15
16
PR
09
CH
C - -
MFT
- -
STATION
- - - -
CHANNEL/CABLE : AV
MOVE :
DELETE :
P
P
SET
i
,
OK
i
SET
R
R
Searching will stop when it locates a stations.
4
Press to select MFT.
Press or
to adjust.
PR
09
CH
C10
MFT
00
STATION
CHANNEL/CABLE : AV
P
i
SET
R
14
Before Operation - VCR part
Changing the order of TV Stations
Deleting TV Stations
After tuning TV stations into your VCR you may wish
to change the order in which they are stored without
having to retune them against! The instructions given
on this page will show you how you can simply move
them into your desired order.
After tuning TV stations into your VCR you may wish
to delete a station.
The instructions given on this page will show you
how easily delete any unwanted TV stations.
Press i/SETUP.
1
The main menu will appear on the TV screen. Press
or to select the PR SET. Press OK/ENTER.
Press i/SETUP.
1
The main menu will appear on the TV screen. Press
or to select the PR SET. Press OK/ENTER.
1
2
A B
C
Pr-12
P
TIME SYS-
SET
REC
ACMS
R
OSD
DATE
TEM
P
1
2
SET
A B
C
+
-
R
f
Pr-12
OSD
ON
OFF
P
TIME SYS-
SET
16:9
4:3
REC
ACMS
-
DECO-
DER
R
OSD
DATE
OK
i
TEM
OPR
P
SET
+
R
f
OSD
ON
OFF
DECO-
DER
16:9
4:3
OK
i
OPR
PR
01
CH
C 02
MFT
00
STATION
PR-01
PR
01
CH
C 02
MFT
00
STATION
PR-01
CHANNEL/CABLE : AV
CHANNEL/CABLE : AV
P
SET
i
R
P
SET
i
R
Press i/SETUP.
Press i/SETUP.
2
3
4
Press or to select the programme number
2
Press or to select the programme number
you want to delete. (for example, PR 03)
you want to move (for example, PR 03).
Press
.
01
02
03
04
05
06
07
08
C02
C03
C04
C05
C06
C07
C08
C09
00
00
00
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
PR-07
PR-08
01
02
03
04
05
06
07
08
C02
C03
C04
C05
C06
C07
C08
C09
00
00
00
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
PR-07
PR-08
MOVE :
DELETE :
P
SET
,
OK
i
R
MOVE :
P
SET
DELETE :
,
OK i
R
Press
.
After a short while, the selected station will be
deleted.
01
C02
C03
C04
00
00
00
PR-01
PR-02
PR-03
02
03
04
05
06
C05
00
00
00
00
00
PR-04
PR-05
PR-06
PR-07
PR-08
C06
C07
C08
C09
01
02
03
04
05
06
C02
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
C03
C05
C06
C04
C07
00
00
00
00
00
07
08
P
SET
OK
i
R
07
08
C08
C09
00
00
PR-07
PR-08
MOVE :
Press or to select the programme number
you want to move to (for example, PR 05).
P
,
DELETE :
OK
i
SET
R
3
4
Press i/SETUP to remove the menus from the TV
01
02
03
04
05
06
07
08
C02
C03
C05
C06
C04
00
00
00
00
00
PR-01
PR-02
PR-04
PR-05
PR-03
screen.
If you wish to delete other TV stations repeat stages
1 - 3.
C07
C08
C09
00
00
00
PR-06
PR-07
PR-08
01
02
03
04
05
06
07
08
C02
C03
C06
C04
C07
C08
00
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
P
SET
OK
i
R
C09
C10
00
00
PR-07
PR-08
Press OK/ENTER.
The selected programme will be moved to the new
programme number.
MOVE:
DELETE :
P
,
OK
i
SET
R
If you wish to move other TV stations repeat stages 1 - 4.
Press i/SETUP to remove the menus from the TV
screen.
How to select Stored TV stations:
Stored TV stations can be selected in either of two ways.
Press PROG. or to select different stations that are
tuned into your VCR.
You may also directly select stations using the
numbered buttons on the remote control.
01
02
03
04
05
06
07
08
C02
C03
C05
C06
C04
C07
C08
C09
00
00
00
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
PR-07
PR-08
MOVE :
P
DELETE :
,
OK
i
SET
R
15
Before Operation - DVD part
General Explanation
This manual gives the basic instructions for operating
this unit. Some DVDs require specific operation or allow
only limited operation during playback. When this
Temporary Feedback Field Icons
TITLE
Repeat Title
CHAPT
Repeat Chapter
TRACK
Repeat Track (non-PBC Video CDs only)
occurs, the symbol
appears on the TV screen,
ALL
indicating that the operation is not permitted by this unit
or is not available on the disc.
Repeat All Tracks (non-PBC Video CDs only)
A
B
Repeat A-B
OFF
Repeat Off
On-Screen Display
The general playback status can be displayed on the TV
Resume play from this point
Action prohibited or not available
screen. Some items can be changed on the menu.
On-screen display operation
Notes
Press DISPLAY during playback.
ꢀ Some discs may not provide all of the below On-
Screen Display.
ꢀ If no button is pressed for 10 seconds, the On-Screen
Display disappears.
1
2
Press or to select an item.
The selected item will be highlighted.
Press or to change the setting of an item.
3
The number buttons can be also be used for setting
numbers (e.g., title number). For some functions,
press OK/ENTER to execute the setting.
DVD
Items
Function (Press
/
to select desired item)
Selection Method
Title Number
Shows the current title number and total number of
/
, or
1/3
1/12
titles, and skips to the desired title number.
Numbers, OK/ENTER
Chapter Number
Time search
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
/
, or
Numbers , OK/ENTER
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
0:16:57
Numbers , OK/ENTER
Audio language
and Digital Audio
Output mode
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
1
ENG
D
6 CH
/
Subtitle language
Shows the current subtitles language, and
OFF
1/1
/
/
changes the setting.
Angle
Shows the current angle number and total number of
angles, and changes the angle number.
Sound
Shows the current sound mode, and
changes the setting.
/
NORM.
VCD1.1
VCD2.0
Items
Function (Press
/
to select desired item)
Selection Method
Track Number
Shows the current track number, total number of tracks
and PBC On mode, and skip to the desired track number.
/
, or
1/4
Numeric, OK/ENTER
Time
Shows the elapsed playing time (Display only)
0:16:57
–
Audio Channel
Sound
Shows the audio channel, and
STER.
/
/
changes the audio channel.
Shows the current sound mode, and
changes the setting.
NORM.
16
Before Operation (Continued) - DVD part
Menu Language
Select a language for the setup menu. This is the menu
you see when you press i/SETUP.
Initial Settings
You can set your own Personal Preferences on this unit.
Initial Settings General Operation
English
Spanish
French
German
Italian
Disc Audio
Disc Subtitle
Disc Menu
Rating
Press i/SETUP.
1
The setup menu appears.
Country Code
TV Aspect
Menu Language
Original
English
Disc Audio
Disc Subtitle
Disc Menu
Rating
Digital Audio Output
Others
French
German
Spanish
Italian
Country code
TV Aspect
Menu Language
Chinese
Polish
Digital Audio Output
Others
Hungarian
Russian
Other — — — —
Picture
DVD
TV Aspect
Press
/
to select the desired item.
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
2
The screen will show the current setting for the
selected item, as well as alternate setting(s).
3 While the desired item is selected, press
4
, then
/
to select the desired setting.
Press OK/ENTER to confirm your
selection.
Some items require additional steps.
16:9 Wide: Select when a 16:9 wide TV is connected.
Press i/SETUP, RETURN or PLAY to exit the
setup menu.
4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Audio
Disc Subtitle
Disc Menu
Rating
5
Country Code
TV Aspect
Language
Menu Language
DVD
Disc Language
Digital Audio Output
Others
Select a language for the disc’s Menu, Audio, and
Subtitle.
Original : The original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the lan-
guage code list on page 34. If you enter the wrong language
code, press CLEAR.
Original
English
Disc Audio
Disc Subtitle
Disc Menu
Rating
French
German
Spanish
Italian
Country code
TV Aspect
Menu Language
Chinese
Polish
Digital Audio Output
Others
Hungarian
Russian
Other — — — —
17
Before Operation (Continued) - DVD part
Sound
Others
Digital Audio Output
The DRC, Vocal and PBC settings can be changed.
ꢀ Press
/
to select the desired item and press
Each DVD disc has a variety of audio output options.
Set the player’s Digital Audio Output according to the
type of audio system you use.
OK/ENTER. The setting of the selected item is
changed between On and Off.
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM”
if you connected this unit’s DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equip-
ment with a Dolby Digital decoder).
DRC Off
Vocal Off
PBC On
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Stream/PCM: Select “Stream/PCM” if you connected
this unit’s DIGITAL OUT jack to an amplifier or other
equipment with a DTS decoder, Dolby Digital decoder
or MPEG decoder.
Menu Language
Digital Audio Output
Others
PCM: select when connected to a 2-channel digital
stereo amplifier. This unit outputs sounds in the PCM
2ch format when you play a DVD video disc recorded
on the Dolby Digital, MPEG1, or MPEG2 recording sys-
tem.
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to On for this effect.
DOLBY
DIGITAL /PCM
Stream/PCM
PCM
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Sample Freq.
48 KHz
Menu Language
96KHz
Digital Audio Output
Others
Vocal
Set Vocal to On only when a multi-channel karaoke DVD
is playing. The karaoke channels on the disc will mix
into a normal stereo sound.
Sample Frequency
To change the Sample Frequency setting, first select the
desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz sig-
nals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio
CDs.
CAUTION
DO NOT select “DOLBY DIGITAL/PCM” or
“Stream/PCM” for the “Digital Audio Output” in the
setup menu when connecting to an AV receiver not
equipped with a Dolby Digital decoder or DTS
decoder (with a coaxial connecting cord).
Merely attempting to play a disc may cause a
screeching noise which could be harmful to your
ears and damage the speakers. In this case, be
sure to select “PCM” for the “Digital Audio
Output”.
18
Before Operation (Continued) - DVD part
Parental Control
DVD
Country Code
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list
(See “Country Code List”, page 35.).
DVD
Rating
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc. These scenes are rated from
1 to 8, and alternatively, more suitable scenes are avail-
able for selection on some discs. Ratings are
country-dependent. The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Code Set
D E
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Digital Audio Output
Others
8
Disc Audio
Disc Subtitle
Disc Menu
Rating
7
6
Select Country Code using the
the setup menu.
/
buttons on
.
5
Country Code
TV Aspect
4
1
3
Menu Language
2
2 While Country Code is selected, press
1
Digital Audio Output
Others
Unlock
Change
3 Follow step 3 of “Rating” on left.
4 Select the first character using the
/
buttons.
Select “Rating” on the Setup menu using the
1
and buttons.
Shift the cursor using
/
buttons and select
.
5
6
2 While “Rating” is selected, press
the second character using
/
buttons.
Press OK/ENTER to confirm your country code
selection, then press i/SETUP to exit the
menu.
When you have not entered a password yet.
Enter a 4-digit password using the numbered but-
3
tons to create a personal 4-digit security password,
then press OK/ENTER. Enter the 4-digit password
again and press OK/ENTER to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered but-
tons to confirm the personal 4-digit security pass-
word, then press OK/ENTER.
Note
Confirmation of the 4-digit password is necessary when
the code is changed (see “Changing the 4-digit code”
below ).
Changing the 4-digit code
If you make a mistake before pressing OK/ENTER, press
CLEAR and enter 4-digit security password again.
1 Follow Steps 1-2 as shown above to the left (Rating).
2 Enter the old code, then press OK/ENTER.
3 Select Change using the
/
buttons then press
Select a rating from 1 to 8 using the
/
but-
OK/ENTER.
4
5
tons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Unlock: If you select Unlock, Parental Control is not
active. The disc will play in full.
Ratings 1 to 8: Some discs contain scenes not
suitable for children. If you set a rating for the play-
er, all disc scenes with the same rating or lower will
be played. Higher rated scenes will not be played
unless an alternative scene is available on the disc.
The alternative must have the same rating or a
lower one. If no suitable alternative is found, play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
4 Enter the new 4-digit code, then press OK/ENTER.
5 Enter exactly the same code a second time and veri-
fy by pressing OK/ENTER.
6 Press i/SETUP to exit the menu.
If you forget your 4-digit code
If you forget your password, to clear the current pass-
word, follow the procedure below.
1 Press i/SETUP to display the setup menu.
2 Use the Number buttons to enter the 6-digit number
“210499”.
The 4-digit password is cleared.
Press OK/ENTER to confirm your rating selec-
tion, then press i/SETUP to exit the menu.
3
Enter a new code as shown above to the left (Rating).
19
Operation with tape
Playing a tape
Slow motion playback, Shuttle :
During playing back or still picture press F or G.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
To switch off the slow motion and shuttle, press the
desired function.
During slow motion and shuttle, the noise bars may
appear on the picture according to the status of
tape.
5
6
You will only be able to load and eject video cassettes
when your VCR is plugged into the mains.
Your VCR may also playback recordings from NTSC
tapes (on PAL TV).
Getting a better picture
When a cassette is inserted and playback started, the
automatic tracking function works to get the best
possible picture automatically. If the quality of the
recording is poor, repeatedly press CH/TRACKING
or on the remote control or CHANNEL N or M
on the front panel to manually adjust the tracking
until any distortions have been removed. Press num-
bered 0 on the remote control to switch automatic
tracking back on again.
If distortions can be seen in the picture, reduce
them with CH/TRACKING D or E.
Press STOP to end playback.
Press EJECT.
If the end of the tape is reached, your VCR will stop
playback automatically, rewind, stop, eject the tape.
AD (Advertisement) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
normal playback.
While tape is playing press AD-SKIP on the remote
control to skip commercial (or another programme
material).
Repeatedly press AD-SKIP to skip:
1 Press 30 seconds
2 Press 60 seconds
Make sure that you have correctly connected your
VCR as described earlier in this book.
Turn on your TV.
Press POWER to turn on your VCR.
Insert the video cassette into your VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
1
3 Press 90 seconds
4 Press 120 seconds
5 Press 150 seconds
6 Press 180 seconds
Press PLAY to start playing your tape.
If you load a video cassette which has had its
record protection tab removed, playback of the cas-
sette will start automatically.
2
OPR (Optimum Picture Response)
AUTO TRACKING
Your VCR will automatically adjust the tracking to
give the best picture quality.
This feature automatically improves playback picture
quality by adjusting your VCR to the condition of the
tape.
Press PAUSE/STEP to still a picture.
3
Press PAUSE/STEP repeatedly to advance the tape
frame by frame.
If you hold down t, the picture will be slowed
down at about 1/19 times the normal playback.
Tapes can be paused for up to 5 minutes. After 5
minutes your VCR will stop the tape to prevent
damaging the tape or your VCR .
Press i/SETUP.
1
2 Press
or to select OPR.
3 Press OK/ENTER.
Still picture quality can be improved slightly by
pressing CH/TRACKING
or
.
Press PLAY to continue playing your tape.
Picture search:
During playing back press either t or r to this
will enable you to rapidly wind the tape (7 times
normal playback) see where you are on the tape.
4
1
2
A B
C
OFF
12
SYS-
TEM
TIME
S
SOFT
OSD
DATE
SHARP
OPR
f
ON
16:9 DECO-
4:3
DER
i
OPR
OFF
Logic search:
During fast forwarding or rewinding press and hold
t or r the picture will be played back at 7
times normal playback speed.
Press
SHARP.
or repeatedly to select: OFF, SOFT or
4
Please note you may only set OPR when
playing a tape.
5 Press i/SETUP return to screen.
20
Operation with tape
Press SPEED if you wish to record in Long Play or
Standard Play.
SP will produce improved picture and sound quality,
however LP will provide twice as much recording
time as SP.
One-Touch Recording (OTR)
5
6
7
Your VCR allows you to make recordings using a
variety of simple methods:
One-Touch Recording (OTR) start recording
immediately for a set period of time or until the
video cassette runs out.
Press REC/OTR to start recording.
RECORD will appear on the TV screen.
Press REC/OTR several times. Each successive
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
Your VCR incorporates Long Play (LP) which
enables you to record up to twice the amount of
time on a video cassette. For example an E-180 will
record up to 180 minutes using Standard Play (SP);
using LP you will be able to record up to 360 minutes.
Please note there will be a slight loss in picture and
sound quality when using LP.
Press PAUSE/STEP to avoid recording unwanted
scenes.
Press PAUSE/STEP to continue recording.
Tapes can be paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5
minutes your VCR will stop recording to prevent
damaging the tape or your VCR.
Make sure that you have correctly connected your
VCR as described earlier in this book.
Press POWER to turn on your VCR.
Press STOP to end recording.
Press EJECT.
EJECT will appear on the TV screen for a few
1
8
seconds.
Insert a video cassette with protection tab into your
2
VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
Notes
ꢀ If you do not wish to record on a tape (this can happen
quite easily by accident!) remove the protection tab on
the back edge of the video cassette.
ꢀ It is possible to record on a video cassette with the
record protection tab removed by covering the hole
with self adhesive tape.
ꢀ Remember you can record one programme while
watching another by starting your one-touch recording,
press TV/VCR to select TV mode and then selecting a
different channel on your TV.
Press
you wish to record.
You may also directly select programme number
using the numbered buttons on the remote control.
or to select the programme number
3
4
If you wish to record directly from the SCART or
RCA sockets repeatedly press AV until the socket
you wish to record from is displayed.
AV 1 for recording from EURO AV1 SCART socket
on the rear of your unit.
AV 2 for recording from EURO AV2 SCART socket
on the rear of your unit.
AV 3 for recording from AV 3 IN VIDEO and AUDIO
(Left & Right) sockets on the front of your unit.
21
Operation with tape
Press F or G to select the settings that you wish to
revise. (PR, DATE, TIME, VPS and SP).
ShowView Programming
6
7
Press D or E to enter the correct information.
ShowView greatly simplifies entering the date,
channel, start and end times of a Timer Recording
by simply entering a ShowView Code. ShowView
Codes are published in most TV guide magazines;
they can vary one to nine numbers in length.
PR
DATE
TIME
SP
SP
SP
SP
SP
SP
SP
ARD
- -
- -
- -
- -
12
- -
- -
- -
- -
- -
- -
10:11~11:55
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -
- -
SHOWVIEW is a registered trademark of Gemstar
Development Corporation.
The SHOWVIEW system is manufactured under
licence from Gemstar Development Corporation.
i
Press D or E to switch VPS/PDC on or off.
Press G to select the recording speed.
Press D or E to select the desired tape speed (SP,
IP, or LP).
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program.
IP mode is not selected when VPS/PDC is ON.
Check that the timer event details are correct.
If you wish to record from AV 3 IN AUDIO and
VIDEO on the front or from either of the EURO
SCART sockets on the back of VCR, press AV to
select for correct display (AV1, AV2 or AV3).
Make sure that TV channels have been tuned and
1
stored in correct SHOWVIEW order.
Insert a video cassette with protection tab into your
VCR.
Press SHOWVIEW.
2
- - - - - - - - -
PR
ARD
- -
- -
- -
- -
- -
- -
DATE
TIME
12
- -
- -
- -
- -
- -
- -
10:11~11:55
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
ONCE
REC SHOWVIEW
0~9,
OK
i
Press D or E to select the recording type.
ONCE: To record once.
WEEKLY: To record at the same time every week.
DAILY: To record every day (except Saturday and
Sunday) at the same time.
3
4
i
If you want to make another ShowView recording
repeat stages 2 - 7.
Press i/SETUP twice.
If PLEASE CHECK is displayed, you have entered
incorrect information and will need to re-enter the
data.
Press the numbered buttons to enter the
ShowView Code of the TV programme that you
wish to record.
If you make a mistake press F then enter the
revised number.
8
Press POWER to switch your VCR power off mode.
TIMER will appear in the video recorder’s display
while your VCR waits to make the recording.
246876543
Notes
ONCE
SHOWVIEW
ꢀ Video Programme System (VPS)
0~9,
OK
i
REC
The Video Programme System (VPS) ensures that the
TV programmes that you have programmed for timer
recording will be recorded exactly from their beginning
to end, even if the actual broadcasting time differs from
the scheduled time due to delayed start, or if the pro-
gramme is extended beyond its scheduled time. Also, if
a programme is interrupted, for example, if a news flash
is inserted, the recording will also be interrupted auto-
matically and resumed when the programme contin-
ues.
Press OK/ENTER.
5
If PLEASE CHECK is displayed it means that you
have entered the wrong ShowView number, entered
the ShowView number incorrectly.
If “- -” is displayed, you have to enter the pro-
gramme number of the station, you want to record
from.
The VPS signal is broadcast by the TV station and this
controls the timer in the video recorder.
PR
DATE
TIME
ARD
- -
- -
- -
- -
12
- -
- -
- -
- -
- -
- -
SP
SP
SP
SP
SP
SP
SP
10:11~11:55
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
VPS should be set ON for all timer recordings from TV
stations broadcasting these signals. It should be set
OFF for all timer recordings from TV stations that are not
broadcasting these signals.
- -
- -
*** The similar system PDC, which is used in the time
being in the Netherlands, can also be used with your
new video recorder.
i
ꢀ If you want to watch a DVD during timer recording,
press TV/VCR on the remote control to select VCR
mode.
22
Operation with tape
Press the numbered buttons to enter the recording start
and end times of the programme that you wish to record.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
Timer recording using On Screen
Display
6
7
You may also select the the start and end times by
You may set up to seven timer record events within
one month of the current date.
pressing
or
.
DATE
16
- -
- -
- -
- -
- -
- -
T
I
M
E
Note
PR
PR-01
- -
- -
- -
- -
- -
- -
19:00~ 20:00
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
Before setting the timer make sure that you have set
the VCR clock correctly and you know which stations
you have tuned TV stations on your VCR.
Insert a video cassette with protection tab into your
i
1
VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
Press
Press
or to switch VPS/PDC on or off.
to select the recording speed.
Press i/SETUP.
2
3
Press or to select REC.
Press
or to select the desired tape speed (SP, IP, or LP).
Press OK/ENTER.
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program. IP mode is not
selected when VPS/PDC is ON.
Press OK/ENTER to start setting the timer record
event.
If all timer record events are full press
or to
select the event that you wish to remove and
replace.
PR
PR-01
- -
- -
- -
- -
- -
- -
DATE
16
- -
- -
- -
- -
- -
- -
T
I
M
E
Press to delete the event.
19:00~ 20:00
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
PR
DATE
- -
- -
- -
- -
- -
- -
- -
T I M E
- -: - -~ - -: - -
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -
- -
- -
- -
- -
- -
- -
SP
SP
SP
SP
SP
SP
SP
i
Check that the timer event details are correct.
i
8
Press i/SETUP twice.
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your VCR Standby.
TIMER will appear in the display window while your
VCR waits to make the recording.
Press the numbered buttons to enter the station
that you wish to record.
4
5
When selecting stations 1 - 9, press 0 first, then the
channel number; for example Stations 3 - 03. You
may also select Channels by pressing
or
.
Notes
Once selected press
.
ꢀ
If at a later date you wish to delete or change any of the
settings in timer event memory you may do so without
having to enter all the timer event information again.
If you wish to record from AV 3 IN AUDIO (L/R) and
VIDEO on the front or from the EURO SCART
sockets on the back of your unit, press AV to select
for correct display (AV1, AV2 or AV3).
Simply display the timer event screen. Press
or
to
select the event that you wish to delete or change.
Press to delete the event...or
PR
FR3
- -
DATE
- -
- -
T I M E
Press OK/ENTER to change; then press
or
to
- -: - -~ - -: - -
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
select; Station, Date, Start and End times and LP.
Press or to enter the correct information.
- -
- -
- -
- -
- -
- -
- -
- -
ꢀ If Timer record events Overlap...
- -
- -
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme
will always be given priority.
i
Example:
Press the numbered buttons to enter the date of
the programme.
Programme 1 is programmed to start at 16:00 and end at 17:00.
Programme 2 is programmed to start at 16:30 and end at 17:30.
(In this case, Programme 1 will be recorded in its entirety, but
only the last 30 minutes of Programme 2 will be recorded.)
ꢀ To watch a DVD while performing a timer
recording, press TV/VCR.
If you press OK/ENTER before entering the date
you may select one of the following automated
recording features. Press or to select, then
press OK/ENTER to confirm.
DLY To record every day (except Saturday and
Sunday) at the same time.
Weekly To record at the same time every week.
PR
DATE
T
I
M
E
- -: - -~ - -: - -
PR-01
- -
- -
- -
- -
16
- -
- -
- -
- -
- -
- -
SP
- -: - -~ - -: - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
- -
- -
DLY SU MO TU WE TH FR SA
i
OK
23
Operation with DVD and Video CD
Playing a DVD and Video CD
General Features
VCD2.0
VCD1.1
DVD
Playback Setup
Note
Unless stated otherwise, all operations
described use the remote control. Some
features may also be available on the Setup menu.
ꢀ Turn on the TV and select the video input source con-
nected to the DVD player.
ꢀ Audio system: Turn on the audio system
and select the input source connected to the
DVD player.
DVD
Moving to another TITLE
1/3
Press OPEN/CLOSE to open the disc tray.
1
When a disc has more than one title, you can move to
another title as follows:
Load your chosen disc in the tray, with the label
ꢀ Press DISPLAY when playback is stopped, then
2
facing up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing up.
press j/l or the appropriate numbered button (0-9)
to select a title number.
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
Moving to another CHAPTER/TRACK
3
1/12
1/3
VCD1.1
DVD
In some cases, the disc menu might appear
instead.
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
ꢀ Press . or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
ꢀ Press . twice briefly to step back to the previous
chapter/track.
DVD
ꢀ To go directly to any chapter during DVD playback,
Use the
buttons to select the title/chapter
you want to view, then press OK/ENTER to start play-
press DISPLAY. Then, press
/
to select C
back.
(chapter) (or for a Video CD, select T for track). Then,
enter the chapter/track number using the numbered
buttons (0-9).
Press TOP/MENU or DISC MENU to return to the menu
screen.
VCD2.0
Note
ꢀ Use the number buttons to select the track you want
to view.
For two-digit numbers, press the buttons in rapid
succession.
Press RETURN to return to the menu screen.
ꢀ Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
18.
VCD2.0
VCD1.1
DVD
Slow Motion
1 Press . or > during pause.
The player will enter SLOW mode.
2 Use the . or > to select the required speed: t
1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16,
T 1/8, T 1/4 or T 1/2 (forward).
Notes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control”, on page 19).
3 To exit slow motion mode, press PLAY.
Note
Slow motion playback in reverse is not applicable for
Video CD.
– DVDs may have a region code.
– Your player will not play discs that have a region code
different from your player. The region code for this
player is 2 (two).
– To watch a DVD while performing a timer
recording, press TV/VCR.
24
Operation with DVD and Video CD
Video CDs - Repeat Track/All/Off
General Features (continued)
1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
Still Picture and Frame-by-frame playback
VCD2.0
VCD1.1
DVD
2 To repeat the disc currently playing, press REPEAT a
second time.
The Repeat All icon appears on the TV screen.
1 Press PAUSE during playback.
The player will now go into PAUSE mode.
2 You can advance the picture frame-by-frame by press-
ing PAUSE repeatedly on the remote control.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
Note
VCD2.0
VCD1.1
DVD
Search
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Repeat function. See page 18.
1 Press and hold . or > for about two seconds
during playback.
The player will now go into SEARCH mode.
2 Press and hold . or > repeatedly to select the
required speed: mX2, mX4, mX16, mX100
(backward) or MX2, MX4, MX16, MX100
(forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
VCD2.0
VCD1.1
DVD
Repeat A-B
A
*
A
B
OFF
To repeat a sequence in a title:
1 Press A-B at your chosen starting point.
A- appears briefly on the TV screen.
2 Press A-B again at your chosen end point.
A-B appears briefly on the TV screen, and the repeat sequence
begins (a-b repeat appears on the player’s display).
3 To exit SEARCH mode, press PLAY.
3 To cancel the sequence, press A-B.
VCD1.1
Karaoke DVD
Random
1 Press RANDOM during playback or in stop mode.
The unit automatically begins Random Playback and
“RANDOM” appears on the TV screen.
0:16:57
- : - - : - -
DVD
Time Search
The Time Search function allows you to start playing at
any chosen time on the disc.
2 To return to normal playback, press RANDOM until
“RANDOM” disappears on the TV screen.
1 Press DISPLAY during playback. The on-screen dis-
play appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
Tips
By pressing . or > during Random playback, the
unit selects another title (track) and resumes Random
playback.
2 Within 10 seconds, press
/
to select the Time
Search icon in the on-screen display.
The “-:--:--” appears in the Time Search box.
Note
This function only works with DVD Karaoke discs and
video CD without PBC.
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and sec-
onds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
VCD2.0
VCD1.1
DVD
Repeat
CHAPT
TITLE
4 Within 10 seconds, press OK/ENTER to confirm the
start time.
ALL
TRACK
OFF
Playback starts from the selected time on the disc. If you enter
an invalid time, playback will continue from the current point.
DVD Video Discs - Repeat Chapter/Title/Off
1 To repeat the currently playing chapter, press
REPEAT.
NORM.
3D SUR
DVD
3D Surround
The Repeat Chapter icon appears on the TV screen.
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
2 To repeat the title currently playing, press REPEAT a
second time.
The Repeat Title icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
1 Press DISPLAY during playback.
2 Press
3 Press
/
/
to select “NORM.” or “3D SUR”.
repeatedly until the desired sound is
selected.
25
Operation with DVD and Video CD
General Features (continued)
DVD
Special DVD Features
VCD2.0
VCD1.1
DVD
Zoom
Checking the contents of DVD Video
discs: Menus
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
DVDs may contain menus that allow you to access spe-
cial features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select an
option. Or, use the / / / buttons to highlight your
selection, then press OK/ENTER.
1 Press ZOOM during playback or still playback to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the magnification level
increases up to six times.
2 Use the
buttons to move through the
zoomed picture.
DVD
Title Menu
3 Press CLEAR to resume normal playback or return to
the paused image.
1 Press TOP/MENU.
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
Note
ꢀ The zoom function may not work for some DVDs.
ꢀ The zoom function may not work on multi-angle
scenes.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3 To remove the title menu, press TOP/MENU again.
VCD2.0
VCD1.1
DVD
Marker Search
DVD
MARKER SEARCH
Disc Menu
1/9
1 Press DISC MENU.
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
The disc menu is displayed.
2 To remove the disc menu, press DISC MENU again.
1 During disc playback, press MARK when
playback reaches the spot that you want to
memorize.
1/1
DVD
Camera Angle
If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle
during playback.
ꢀ Press ANGLE repeatedly during playback to select a
desired angle.
The Marker icon will appear on the TV screen briefly.
2 Repeat step 1 to enter up to nine Marker points on a
disc.
To Recall a Marked Scene
The number of the current angle appears on the display.
1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
DVD
Changing the Audio Language
2 Within 10 seconds, press
/
to select a Marker num-
1
ENG
D
ber that you want to recall.
6
CH
3 Press OK/ENTER.
Press AUDIO repeatedly during playback to hear a dif-
ferent audio language or audio track.
Playback will start from the Marked scene.
4 To remove the MARKER SEARCH menu, press
SEARCH.
1
ENG
DVD
Subtitles
To clear a Marked Scene
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
2 Press
/
to select the Marker number that you want
to erase.
Note
If
appears, the feature is not available on the disc.
3 Press CLEAR.
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
5 To remove the MARKER SEARCH menu, press
SEARCH.
26
Operation with Audio CD and MP3 Discs
CD
Playing an Audio CD and MP3 discs
Search
1 Press and hold . or > for about two seconds
during playback.
The player will now go into SEARCH mode.
The DVD Player can play MP3 formatted recordings on
CD-ROM, CD-R, or CD-RW discs.
Before playing MP3 recordings, read the notes on MP3
Recordings on page 31.
2 Press and hold . or > repeatedly to select the
required speed: mX2, mX4, mX8 (backward) or
MX2, MX4, MX8 (forward).
Insert a disc and close the tray.
The menu appears on the TV screen.
1
3 Search speed and direction are indicated on the
menu screen.
MP3
Program
CD
Program
TRACK 1.MP3
TRACK 1
TRACK 2.MP3
TRACK 3.MP3
TRACK 4.MP3
TRACK 5.MP3
TRACK 6.MP3
TRACK 7.MP3
TRACK 8.MP3
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
4 To exit SEARCH mode, press PLAY.
Clear All
OFF
Clear All
NORM.
CD
Random
56:35
1
0:56:35
STER.
1 Press RANDOM during playback or when playback is
stopped.
Audio CD menu
MP3 menu
The unit automatically begins Random Playback and
“RAND.” appears on the menu screen.
Press
Playback starts.
During playback, the current track’s elapsed playing
time will appear on the display.
Playback will stop at the end of the disc.
/
to select a track then press PLAY.
2
2 To return to normal playback, press RANDOM repeat-
edly until “RAND.” disappears on the menu screen.
3 To stop playback at any other time, press STOP.
CD
Repeat A-B
To repeat a sequence.
1 During disc playback, press A-B at your chosen start-
ing point.
The Repeat icon and “A -” appears on the menu screen.
CD
MP3
Pause
1 Press PAUSE during playback.
2 To return to playback, press PLAY or press PAUSE
again.
2 Press A-B again at your chosen end point.
The Repeat icon and “A B” appears on the menu screen,
and the sequence begins to play repeatedly.
3 To exit the sequence and return to normal play, press
A-B again.
CD
MP3
Moving to another Track
ꢀ Press . or > briefly during playback to go to the
next track or to return to the beginning of the current
track.
The Repeat icon and “OFF” appear on the menu screen.
CD
3D Surround
ꢀ Press . twice briefly to step back to the previous
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
track.
ꢀ In case of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
during playback.
1 Press DISPLAY or AUDIO during playback.
CD
MP3
Repeat Track/All/Off
2 Press
3 Press
/
/
to select “NORM.” or “3D SUR”.
repeatedly until the desired sound is
1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the menu screen.
selected.
2 To repeat all tracks on a disc, press REPEAT a sec-
ond time.
The Repeat ALL icon appears on the menu screen.
CD
Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a
different audio channel (STEREO, LEFT, or RIGHT).
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat OFF icon appears on the menu screen.
27
VCD2.0
VCD1.1
CD
MP3
Programmed Playback
Programmed Playback with Audio CD
and MP3 Discs
Programmed Playback with Video CD
Note
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Program function. See page 18.
Program allows you to store your favorite tracks for a
particular disc in the player memory.
Program can contain 32 tracks (Audio CD) or 60 tracks
(MP3 disc).
Insert Video CD and close the tray.
1
2
Insert the disc and close the tray.
Press PROGRAM while playback is stopped.
The VCD Program menu will appear.
The menu is displayed on the TV screen.
1
Press PROGRAM during playback or in the stop
VCD
Program
E
2
mode to enter the Program Edit mode.
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
E
The
mark will appear to the right of the word Program
on the right side of the menu screen.
Clear All
Note
E
Press PROGRAM to exit the Program Edit mode; the
mark will disappear.
Note
Press RETURN or PROGRAM to exit the Program menu.
Press
/
to select a track, then press
3
4
OK/ENTER to place the selected track on the
Program list.
Follow steps 3-7 of “Programmed Playback with
Audio CD and MP3 Disc” on left.
3
Repeat step 3 to place additional tracks on the
Program list.
Repeat Programmed Tracks
CD
Program
E
MP3
Program
E
ꢀ To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the menu screen.
ꢀ To repeat all tracks on the program list, press
REPEAT a second time.
The Repeat All icon appears on the menu screen.
ꢀ To cancel Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the menu screen.
TRACK 1
TRACK 12
TRACK 8
TRACK 10
TRACK 3
TRACK 1.MP3
TRACK 8.MP3
TRACK 2.MP3
TRACK 4.MP3
TRACK 3.MP3
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
TRACK 2.MP3
TRACK 3.MP3
TRACK 4.MP3
TRACK 5.MP3
TRACK 6.MP3
TRACK 7.MP3
TRACK 8.MP3
Clear All
NORM.
Clear All
OFF
0:00:14
STER.
56:35
1
Audio CD menu
MP3 menu
Erasing a Track from Program List
1 Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
Press
.
The programmed track you selected last is highlighted on
the program list.
5
6
E
The
mark will appear.
Press
playing.
/
to select the track you want to start
2 Press to move to the Program list.
3 Use to select the track that you wish to erase
from the Program list.
4 Press CLEAR.
The track will be erased from the Program list.
/
Press TOP MENU0 to move to the next page.
Press DISC MENU to move to the previous page.
Press PLAY to start.
Playback begins in the order in which you programmed the
tracks and “PROG.” appears on the display window.
Playback stops after all of the tracks on the Program list
have played once.
7
Erasing the Complete Program List
1 Follow steps 1-2 of “Erasing a Track from Program
List” as above.
2 Use
/
to select “Clear All”, then press OK/ENTER.
The complete Program for the disc will be erased.
The programs are also cleared when the disc is removed.
To resume normal playback from programmed
playback
Press and hold PROGRAM for 3 seconds until “PROG.”
indicator disappears in the display window.
28
Additional Operation - VCR part
On Screen Display
You may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your VCR will appear on the TV screen. If a recording
is taking place these On Screen Displays will not be
recorded onto the tape.
Turning on/off the On Screen
Display
Set the OSD off when dubbing a tape to another
tape.
Press i/SETUP.
1
Press or to select F.OSD ON/OFF, then press
Press CLK/CNT to display.
Press CLK/CNT repeatedly to cycle through the
display options. The tape counter and amount of
tape left will appear if there is a tape loaded.
2
OK/ENTER.
1
3 Press
or to select ON or OFF.
4 Press i/SETUP to return to the normal screen.
After 3 seconds the majority of the On Screen
2
Displays will clear leaving only the clock or tape
counter and the amount of tape left on the screen.
Press CLK/CNT again to remove all displays from
the TV screen.
Tape Counter Memory Stop
The Digital Tape Counter can be displayed on the display
window instead of the time by pressing CLK/CNT on
the remote control. The Digital Tape Counter indicates
the relative positions of recordings on the tape.
Press CLK/CNT.
Press CLEAR to set the counter to 0:00:00.
Press PLAY or start recording.
The tape counter will display the actual play time in
1
hours, minutes and seconds.
Press STOP when playback or recording is complete.
Press r.
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
2
Child Lock
The control buttons on the front of the VCR can be
switched off so that your VCR can only be operated
using the remote control.
Press C.LOCK.
1
will appear in the display window.
None of the buttons on the front of your VCR will
work (except STOP and EJECT).
If any buttons on the front of your unit are pressed
will flicker in the display window for a few sec-
onds.
Press C.LOCK again to switch off the child lock.
2
will disappear in the display window.
29
Additional Operation - VCR part
Hi-Fi Stereo Sound System
Your VCR will record and playback Hi-Fi stereo sound.
This allows you to record and playback the sound in
several different ways. Video cassettes recorded on your
VCR will have a normal mono audio track and two VHS
Hi-Fi stereo audio tracks. These stereo tracks allow you
to make audio recordings in Hi-Fi stereo or bilingual
mode from a TV broadcast, stereo audio system, video
disc or another Hi-Fi VCR.
Press D or E repeatedly to select: AUTO, 4:3 or
16:9.
AUTO:
Automatically plays back Wide-Screen
programmes as Wide-Screen and Normal
programmes as normal.
2
3
4:3
Only for playing back and recording Normal format
recordings (4:3).
16:9:
Only for playing back and recording Wide-Screen
format recordings (16:9).
Your VCR’s allows you to enjoy broadcasts with
1
standard stereo, bilingual and mono sound. The
particular type of sound received or that recorded
will be briefly displayed on the TV screen for a
couple of seconds:
1
2
A B
C
Pr-12
P
SET
REC
ACMS
-
OSD
AUTO
R
4:3
STEREO
16:9
4:3
+
f
OSD
ON
16:9 DECO-
DER
16:9
i
OFF 4:3
Sound is automatically recorded on the Hi-Fi stereo
and mono tracks of the video tape.
BIL
Both audio channels will be recorded on the Hi-Fi
stereo tracks. The primary language channel (left)
will be recorded on the mono track of the video
tape.
Press i/SETUP to remove the menus from the TV
screen.
To enjoy Wide-Screen playback you must
connect your VCR to the TV using a SCART cable.
MONO
To set the decoder
The sound is recorded on the Hi-Fi tracks and the
We have already described, how to connect a decoder
for pay-TV station as CANAL+ or PREMIERE on page
9. For the recording of an encoded station you do not
have to control anything. You just select the station and
wait shortly until the decoding will start.
mono track of the video tape without any separation.
Press AUDIO repeatedly until the desired audio mode
appears.
2
The choice is STEREO, LEFT, RIGHT and MONO.
3
Press i/SETUP.
The main menu will appear on the TV screen.
Press F or G to select the DECODER.
Press OK/ENTER.
In BIL playback the primary language is output
1
onthe left channel and the secondary channel is
output simultaneously from the right channel when
audio output is set to STEREO. The primary language
willbe output from both channels when the audio
setting is MONO.
Press D or E to select.
ON: When the decoder is connected to the AV2
socket.
OFF: When another VCR is connected to the AV2
socket.
Press i/SETUP to return to a TV picture.
Please note that when adjusting the tracking control
Hi-Fi stereo sound may revert to MONO.
2
Wide Screen Compatibility 16:9
Your VCR can record and play back wide screen aspect
ratio programmes (16:9). To record a wide screen format
programme successfully the correct type of wide screen
signal must be broadcast by the TV station.
Switch on your VCR.
1
Press i/SETUP.
Press F or G to select 16:9/4:3.
Press OK/ENTER.
1
2
A B
C
1
2
A B
C
Pr-12
P
TIME
SYS-
TEM
Pr-12
SET
REC
f
ACMS
-
OSD
P
R
DATE
SET
REC
f
ACMS
-
OSD
16:9
4:3
R
AUTO
+
16:9
4:3
OSD
ON
OFF 4:3
+
OSD
ON
OFF 4:3
4:3
16:9
16:9 DECO-
DER
OK
i
16:9 DECO-
DER
OPR
i
30
Additional Operation - DVD part
VCD2.0
VCD1.1
Notes on MP3 Discs
DVD
Video Mode Setting
ꢀ With certain discs, the playback picture may be flick-
ering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
About MP3
ꢀ
An MP3 file is audio data compressed by using MPEG1,
the audio layer-3 file-coding scheme. We call files that
have the “.mp3” file extension “MP3 files”.
ꢀ The player can not read an MP3 file that has a file
extension other than “.mp3”.
ꢀ To change the video mode, press and hold DISPLAY
about 3 seconds during disc playback. The new video
mode number selected is displayed on the TV screen.
Check whether the video quality has improved. If not,
repeat the above procedure until picture quality is
improved.
ꢀ The player can not read a fake MP3 file that has a
file extension “.mp3”.
MP3 Disc compatibility with this player is
limited as follows:
1. Sampling Frequency / only at 44.1kHz
2. Bit rate/ only 128kbps
ꢀ Video mode change sequence:
MODE1 → MODE2 → MODE3 → MODE4 →
MODE5 → MODE1
3. CD-R physical format should be “ISO 9660”
4. If you record MP3 files using the software which
cannot create a FILE SYSTEM, for example “Direct-
CD” etc., it is impossible to playback MP3 files. We
therefore recommend that you use “Easy-CD
Creator”, which creates an ISO9660 file system.
5. A single session disc requires MP3 files in the first
track. If there is no MP3 file in the 1st track, it cannot
playback MP3 files. If you wish to playback MP3
files, format all the data in the disc or use a new
one.
ꢀ If you turn off the the power, the video mode will be
back to initial state (MODE1).
6. We do not recommend using CD-RW discs. Please
use finished CD-R discs only.
7. File names should be named using 8 letters or less
and must incorporate the “.mp3” extension
e.g. “********.MP3”.
8. Characters other than uppercase letters (“A” to “Z”),
numerals (“0” to “9”) and underscore (“_”) may not
be displayed, or may be displayed in different char-
acters.
9. Total number of files on the disc should be less than
255.
10. Use 74 minute CD-R discs (650M), do not use 80
minute CD-R (700M) software.
This DVD player requires discs/recordings to meet
certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically
set to these standards. There are many different types
of recordable disc formats (including CD-R containing
MP3 files).
Customers should also note that permission is required
in order to download MP3 files and music from the
Internet. Our company has no right to grant such per-
mission. Permission should always be sought from the
copyright owner.
31
Special Recording
Copying from DVD To VCR
This unit allows you to copy the contents of a DVD to a
VHS tape.
Recording from another video
recorder
With this video recorder you can make recordings from
an external source, such as copying from another video
recorder or a camcorder.
Note
If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted
to copy Macrovision encoded DVDs. “COPY PROTECT-
ED DISC” appears on the TV screen.
Note
In the following description, this video recorder will be
one used for recording and will be referred to as VCR B.
The other appliance will be used for playback and will
be referred to as VCR A.
Insert Disc.
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
1
VCR A should be connected to the SCART socket
on the rear panel of your unit or the AV 3 IN sock-
ets on the front panel of your unit.
Insert VHS Tape.
Insert a blank VHS video tape into the VCR deck.
1
2
Press PLAY on the DVD deck.
Insert the recorded tape into VCR A and a blank
tape into VCR B.
3
The DVD will go into play mode
ꢀ If the DVD disc menu appears, you may need to press
the PLAY manually to begin copying.
2
To start recording, press the REC/OTR on VCR B
and PLAY on VCR A.
Press REC/OTR (z) on the VCR deck.
The unit will go into Record mode.
3
4
When you want to finish copying, press the STOP
on both video recorders.
Stop the Copy Process.
4
5
When the DVD is finished playing, press the VCR
on the remote control and then press STOP (x) to
end the copy.
You must stop the Copy process manually when the
DVD movie ends, or the unit may replay and record
over and over again.
Note
Recording the tape continues, even if you press
PAUSE(X) while copying.
32
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
ꢀ Refer to page 2.
Symptom
ꢀ DVD or VCR button is not switched
DVD or VCR do not
work properly.
properly.
ꢀ Plug the power cord into the wall outlet
securely.
ꢀ The power cord is disconnected.
ꢀ No disc is inserted.
No power.
ꢀ Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
The power is on, but
the DVD player does
not work.
ꢀ Select the appropriate video input mode
on the TV so the picture from the DVD
player appears on the TV screen.
ꢀ The TV is not set to receive DVD signal
output.
No picture.
ꢀ Connect the video cable into the jacks
securely.
ꢀ The video cable is not connected
securely.
No sound.
ꢀ Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
ꢀ The equipment connected with the
audio cable is not set to receive DVD
signal output.
ꢀ Connect the audio cable into the jacks
securely.
ꢀ The audio cables are not connected
securely.
ꢀ Turn on the equipment connected with
the audio cable.
ꢀ The power of the equipment connected
with the audio cable is turned off.
ꢀ Set the Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
ꢀ The Digital Audio Output is set to the
wrong position.
The picture is poor.
ꢀ Clean the disc.
ꢀ Check tuning, carry out tuning again.
ꢀ The disc is dirty.
ꢀ The TV channels are not tuned in properly.
ꢀ Insert a playable disc. (Check the disc
type and Regional code.)
ꢀ An unplayable disc is inserted.
The DVD player does
not start playback.
ꢀ Place the disc with the playback side
down.
ꢀ The disc is placed upside down.
ꢀ The disc is not placed within the guide.
ꢀ Place the disc on the disc tray correctly
inside the guide.
ꢀ Clean the disc.
ꢀ The disc is dirty.
ꢀ Cancel the Rating function or change
the rating level.
ꢀ The Rating level is set.
The remote control
ꢀ Remove the obstacle.
ꢀ There is an obstacle in the path of the
does not work properly.
remote control and this unit.
ꢀ Replace the batteries with new ones.
ꢀ Eject the tape in.
ꢀ The batteries in the remote control are
exhausted.
Video tape cannot be
inserted.
ꢀ Is the cassette compartment empty?
No Hi-Fi sound
ꢀ Select “STEREO” by repeatedly pressing
“AUDIO” on the remote control.
ꢀ Audio mode is not set properly.
Video Head Cleaning
Dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken
up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes
might. Clean the video heads with a commercially available video heads cleaning tape.
33
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”
(See page 17).
Code Language
Code Language
Code Language
Code Language
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Abkhazian
Afar
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Fiji
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
Lingala
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Finnish
Lithuanian
Macedonian
Malagasy
Malay
Afrikaans
Albanian
Ameharic
Arabic
French
Frisian
Galician
Georgian
German
Greek
Malayalam
Maltese
Armenian
Assamese
Aymara
Maori
Greenlandic
Guarani
Gujarati
Hausa
Marathi
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Tamil
Basque
Tatar
Bengali; Bangla
Bhutani
Hebrew
Hindi
Nepali
Telugu
Thai
Norwegian
Oriya
Bihari
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Tibetan
Tigrinya
Tonga
Breton
Panjabi
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Pashto, Pushto
Persian
Turkish
Turkmen
Twi
Polish
Italian
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Ukrainian
Urdu
Chinese
Corsican
Croatian
Czech
Uzbek
Vietnamese
Volapük
Welsh
Samoan
Sanskrit
Danish
Dutch
Korean
Scots Gaelic
Serbian
Wolof
English
Kurdish
Laothian
Latin
Xhosa
Esperanto
Estonian
Faroese
Serbo-Croatian
Shona
Yiddish
Yoruba
Zulu
Latvian, Lettish
Sindhi
34
Country Code List
Enter the appropriate code number for the initial setting “Country Code” (See page 19).
Code Country
Code Country
Code Country
Code Country
AD
AE
AF
AG
AI
Andorra
ER
ES
ET
FI
Eritrea
Spain
Ethiopia
Finland
LC
LI
LK
LR
LS
LT
LU
LV
LY
MA
MC
MD
MG
MH
MK
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libya
Morocco
Monaco
SC
SD
SE
SG
SH
SI
Seychelles
Sudan
Sweden
Singapore
Saint Helena
Slovenia
Svalbard and Jan Mayen
Islands
Slovak Republic
Sierra Leone
San Marino
Senegal
Somalia
Suriname
Saint Tome and Principe
Former USSR
El Salvador
Syria
Swaziland
Turks and Caicos Islands
Chad
French Southern
Territories
Togo
Thailand
Tadjikistan
Tokelau
Turkmenistan
Tunisia
Tonga
East Timor
Turkey
Trinidad and Tobago
Tuvalu
Taiwan
Tanzania
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
Albania
Armenia
Netherlands Antilles
Angola
Antarctica
Argentina
American Samoa
Austria
Australia
FJ
Fiji
AL
FK
FM
FO
FR
FX
Falkland Islands
Micronesia
Faroe Islands
France
France (European
Territory)
Gabon
Great Britain
Grenada
Georgia
French Guyana
Ghana
Gibraltar
Greenland
Gambia
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
SJ
SK
SL
SM
SN
SO
SR
ST
SU
SV
SY
SZ
TC
TD
TF
GA
GB
GD
GE
GF
GH
GI
GL
GM
GN
GP
GQ
GR
GS
Moldavia
Madagascar
Marshall Islands
Macedonia
Mali
Myanmar
Mongolia
Aruba
Azerbaidjan
Bosnia-Herzegovina
Barbados
Bangladesh
Belgium
Burkina Faso
Bulgaria
Bahrain
Burundi
Benin
Bermuda
Brunei Darussalam
Bolivia
Brazil
Bahamas
Bhutan
Bouvet Island
Botswana
Belarus
Belize
Canada
Cocos (Keeling) Islands
Central African Republic
Congo
Switzerland
Ivory Coast
Cook Islands
Chile
Cameroon
China
Colombia
Costa Rica
Former Czechoslovakia
Cuba
Cape Verde
Christmas Island
Cyprus
Czech Republic
Germany
Djibouti
Denmark
Dominica
Dominican Republic
Algeria
Ecuador
Estonia
Egypt
Western Sahara
Macau
Northern Mariana Islands
Martinique (French)
Mauritania
Montserrat
Malta
Guinea
Guadeloupe (French)
Equatorial Guinea
Greece
S. Georgia & S. Sandwich
Isls.
Guatemala
Guam (USA)
Guinea Bissau
Guyana
Hong Kong
Heard and McDonald
Islands
Honduras
Croatia
Haiti
Hungary
Indonesia
Ireland
Israel
India
British Indian Ocean
Territory
Iraq
Iran
Iceland
Italy
Jamaica
TG
TH
TJ
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
UA
UG
UK
UM
BJ
Mauritius
Maldives
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CS
CU
CV
CX
CY
CZ
DE
DJ
GT
GU
GW
GY
HK
HM
MW Malawi
MX
MY
MZ
NA
NC
NE
NF
NG
NI
NL
NO
NP
NR
NU
NZ
OM
PA
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
Mexico
Malaysia
Mozambique
Namibia
New Caledonia (French)
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
Peru
Polynesia (French)
Papua New Guinea
Philippines
Pakistan
HN
HR
HT
HU
ID
IE
IL
IN
IO
Ukraine
Uganda
United Kingdom
USA Minor Outlying
Islands
United States
Uruguay
Uzbekistan
Vatican City State
Saint Vincent &
Grenadines
Venezuela
Virgin Islands (British)
Virgin Islands (USA)
Vietnam
Vanuatu
Wallis and Futuna Islands
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zaire
Zimbabwe
US
UY
UZ
VA
VC
IQ
IR
IS
IT
JM
JO
JP
KE
KG
KH
KI
KM
KN
KP
KR
KW
KY
KZ
LA
LB
VE
VG
VI
Jordan
Japan
Kenya
Poland
Saint Pierre and Miquelon
Pitcairn Island
Puerto Rico
Portugal
Palau
Paraguay
Qatar
Reunion (French)
Romania
Russian Federation
Rwanda
Saudi Arabia
Solomon Islands
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZR
ZW
Kyrgyzstan
Cambodia6
Kiribati
Comoros
Saint Kitts & Nevis Anguilla
North Korea
South Korea
Kuwait
DK
DM
DO
DZ
EC
EE
EG
EH
Cayman Islands
Kazakhstan
Laos
Lebanon
35
Specification
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Timer
AC 200-240V, 50 Hz
23W
430 X 97.5 X 360 mm (w/h/d)
5.4 kg
5˚C to 35˚C (41˚F to 95˚F)
5 % to 90 %
24 hours display tape
UHF 22-68 (Adjustable)
RF Modulator
System
Laser
Semiconductor laser, wavelength 650 nm
Double azimuth 4 heads, helical scanning.
PAL
Video Head system
Signal system
Frequency response
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100dB (ANALOG OUT connectors only)
Less than 0.008%
More than 100 dB (DVD)
More than 95 dB (CD)
Inputs (VHS)
Audio
-6.0dBm, more than 10 kohms (SCART)
-6.0dBm, more than 47 kohms (RCA)
Video
1.0 Vp-p, 75 ohms, unbalanced (SCART/RCA)
Outputs (DVD)
VIDEO OUT
1 Vp-p 75 ohms, sync negative
Audio output (digital audio)
Audio output (analog audio)
0.5 V (p-p), 75 Ω, RCA jack x 1
2.0 Vrms (1 KHz, 0 dB), 330 Ω, RCA jack (L, R)x1/SCART (TO TV)
Outputs (VHS)
Audio
-6.0dBm, less than 1 kohms (SCART)
1.0Vp-p, 75 ohms, unbalanced (SCART)
Video
Accessory:
Video cable x 1, Audio cable x 1, RF aerial cable x 1, Remote control x 1
ꢀ Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
36
|